Low Pressure Tie Rod Hydraulic Cylinder
  • Air ProLow Pressure Tie Rod Hydraulic Cylinder
  • Air ProLow Pressure Tie Rod Hydraulic Cylinder
  • Air ProLow Pressure Tie Rod Hydraulic Cylinder
  • Air ProLow Pressure Tie Rod Hydraulic Cylinder

Low Pressure Tie Rod Hydraulic Cylinder

Hydrotech has been committed to the product development, production and service of hydraulic cylinders and hydraulic systems. Hydraulic products include hydraulic cylinders, hydraulic valves, and hydraulic systems, among which Low pressure tie rod hydraulic cylinder is the dominant product.
As a large-scale manufacturer of hydraulic cylinders and hydraulic systems, Hydrotech is committed to providing global customers with integrated hydraulic solutions, which are widely distributed in Europe and North America.

Send Inquiry

Product Description

High level Low pressure tie rod hydraulic cylinder


1.Product Introduction
The Low pressure tie rod hydraulic cylinder is the company's superior product, with rich manufacturing experience, mature technology and high cost performance, which can be used in place of the cylinder.

Hydrotech has compiled a parameter table of low-pressure Tie rod hydraulic cylinders suitable for the machine tool industry, such as hydraulic cylinders for band saw machines, in accordance with market demand. Customers order according to the following parameters, which is convenient and fast, and the delivery time is fast.



2.Scope of application 
1) The operating pressure range of Low pressure tie rod hydraulic cylinder is below 5MPA;
2) The front cover, rear cover and piston are made of castings, the cylinder tube is 20# steel, and the piston rod is 45# steel chrome-plated;
3) The default is that the cylinder is mainly subjected to thrust, if the main force is to be pulled, special instructions from the customer are required;
4) The inner diameter of this series of products ranges from 63 to 125 mm, and the maximum thrust is 4.8 tons;
5) The default is no buffering. If buffering is needed, special instructions from the customer are required.



3.Selection of installation methods
1. Flange

2. Earrings

3.Pin shaft



4.Order note:
1. to order Low pressure tie rod hydraulic cylinders, Cylinder diameter, stroke, and installation method must be provided, indispensable;
2. Need to adjust the stroke: MOD double-shaft hydraulic cylinder, one end of the piston rod is equipped with an adjustable nut, so that the cylinder can be adjusted within its stroke range;
3. Whether buffering is needed: The cylinder terminal is also equipped with adjustable buffering to make the cylinder reversing smoothly and without impact (customers need to order from our company's special instructions when ordering);
4. Whether the temperature needs to be resistant to high temperature: high temperature resistant sealing materials can be used to make the oil cylinder work normally at a high temperature of 180°C (customers need to place an order with the company's special instructions when ordering).

Hot Tags: Low Pressure Tie Rod Hydraulic Cylinder, Manufacturers, Suppliers, Factory, Customized, In Stock, China, Price

Related Category

Send Inquiry

Please feel free to give your inquiry in the form below. We will reply you within 24 hours.
  • Phone: +86-532-88984996