The main function of hydraulic transmission system is to transmit power and movement. Generally speaking, hydraulic system mainly refers to hydraulic transmission system. The hydraulic system consists of two parts: signal control and hydraulic power. The signal control part is used to drive the control valve in the hydraulic power part. Hydrotech's Non-standard hydraulic system for industry can meet specific performance requirements and provide customized solutions for customers.
Non-standard Hydraulic System For Industry
We can design and customize Non-standard hydraulic system for industry with various control functions according to customer requirements, and can also provide overall hydraulic solutions with low failure rate.
Do you need to customize according to practical working conditions and function descriptions? We can help you design and manufacture non-standard hydraulic pumping stations.
Non-standard hydraulic system for industry can be customized according to customer needs. Non-standard hydraulic system for industry, including micro hydraulic pumping stations, small hydraulic pumping stations, large hydraulic pumping stations, non-standard hydraulic cylinders, electrical control systems, etc., can meet the needs of customers in special working conditions. Such as throttling, coal mine explosion-proof, synchronization and other requirements.
To make a hydraulic system, the customer needs to provide what kind of functional requirements the hydraulic pressure must meet. The entire working process of the hydraulic system. For example, there are several oil cylinders or motors, how much thrust each oil cylinder needs to achieve, whether the speed of each oil cylinder changes, and the load condition of each oil cylinder. When there are multiple cylinders, is there a requirement for simultaneous work or synchronization? (Whether it changes, working hours and working environment need to be provided)
The manufacturing and delivery of products strictly follow the ISO 9001:2000 quality management system, and meet the needs of users in accordance with the quality, quantity, and schedule as stipulated in the contract.
Oil and working conditions of hydraulic pump station 32# and 46# anti-wear hydraulic oil are recommended. The most suitable oil temperature is 30-55°C. When the oil temperature is lower than 15°C or greater than 60°C, operation is prohibited. To adjust the oil temperature, it can be heated or cooled in advance. The hydraulic oil should be replaced once every 1 to 6 months, and the oil tank should be cleaned to remove dirt and dust. The most taboo of Non-standard hydraulic system for industry is that the oil becomes dirty and deteriorated, otherwise the dust will be stuck on the oil suction filter, which will increase the noise and reduce the life of the oil pump. Therefore, always keep the oil clean.
4. Adjustment sequence of Non-standard hydraulic system for industry
(1) Wipe and clean the Non-standard hydraulic system for industry and install it, fix it with anchor bolts (small-capacity hydraulic pump station can be placed directly on the floor), level, clean and fill in oil.
(2) Lay piping with reference to hydraulic principle and hydraulic piping diagram.
(3) Introduce the electrical control line with reference to the electrical schematic diagram.
(4) Loosen all pressure valve adjustment handles (usually rotate counterclockwise), jog the motor, and check the steering to ensure that the steering of Non-standard hydraulic system for industry is correct.
(5) Start the motor. For the fixed pump system, the overflow valve needs to be adjusted. For the variable pump, adjust the flow rate and then adjust the overflow valve to the pressure of the system. Take care to eliminate oil leakage in the external pipeline.
(6) Adjust the pressure valve and the flow valve to the specified state in turn, and manually use the solenoid directional valve to check whether the actuator action of Non-standard hydraulic system for industry is correct.
(7) Use electrical debugging cycles to check whether the host is operating normally.
(8) Debug the electric and hydraulic stop irons to the specified position to ensure that the itinerary is sent.
(9) Use electrical debugging cycle to adjust the flow valve to ensure the movement speed and complete the specified cycle.
(10) Use electrical semi-automatic circulation, run continuously for half an hour, confirm that it is correct, and the power and speed meet the requirements, then it can be put into semi-automatic or automatic circulation to work normally.
Low Noise:fine construction, high quality,low noise;
Low Energy:perfect design of circuit,required energy saving;
Space-saving:pump and motor compling directly to save space;
Various models:a variety combination of hydraulic circuit,right models;
Standard hydraulic circuit,control loop,easy maintenance;
Special models can be customized.
Our Non-standard hydraulic system for industry is widely used on various machine,such as engineering machinery, cnc lathe ,wood machine,press machine, packaging machinery,elevating machine,transport machine, agricultural machine and so on.
1. 24 hours online service;
2. One year warranty, repair and service for the whole life.
3. Question report will be replied in 48 hours.
4. Quality guaranteed.